model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 customer approved signatures high-power led type size (mm):7.3*5.0*1.3 checked by architectural lighting interior automotive features: illuminations rohs compliant product specification model no. fylp-5052pgc-0.5w prepared by fylp-5052pgc-0.5w a approved by applications: lcd tv backlight smt package suitable for all smt assembly and soldering method http://www.foryard.com pb-free reflow soldering application emitting color:pure green
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010] and angle is 1 unless otherwise noted. 2. bending length*1%. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 http://www.foryard.com model no. fylp-5052pgc-0.5w fylp-5052pgc-0.5w a
model. no. rev. min. typ. 3.00 --- 520 --- --- 35 --- 120 page 3/8 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. material ppa gold silicone ingan note: chip item reflector wire encapsulate material 2? if = 150ma 50% power angle --- --- unit v u a nm lm deg v items forward voltage reverse current dominant wavelength luminous flux symbol vf ir (d) mw 5 if = 150ma 5 535 ma max 4.00 -40 o c+85 o c reflow soldering:250 /5sec vr = 5v condition if = 150ma if = 150ma v vr tsol symbol ifp power dissipation operation temperature topr if 200 450 peak forward current* absolute maximum rating 150 absolute maximun ratings(ta=25 o oo o c) *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 reverse voltage tstg forward current(dc) pd model no. fylp-5052pgc-0.5w items unit a fylp-5052pgc-0.5w ma -40oc+100oc typical electrical &optical charcteristics(ta=25oc ) soldering temperature storage temperature http://www.foryard.com
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 http://www.foryard.com fylp-5052pgc-0.5w a model no. fylp-5052pgc-0.5w
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 model no. fylp-5052pgc-0.5w a http://www.foryard.com fylp-5052pgc-0.5w
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 fylp-5052pgc-0.5w a model no. fylp-5052pgc-0.5w http://www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fylp-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention 5052 1000/reel 10 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 1 8 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 38.0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 1. storage (2)reflow soldering temperature profile baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 and soldering time no more than 2 seconds. the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. model no. fylp-5052pgc-0.5w http://www.foryard.com before opening the packaging , check for air leaks in the bag. fylp-5052pgc-0.5w frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron secondary protection required if the shelf life has expired a the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 high-brightness led light may injure human eyes. av oid looking directly into lighted led the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded 4. others is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds must be pre-qualified to avoid damage to t he smd leds. reflow soldering should not be done more t han one time no stress should be exerted on the package during soldering. (3) recommend soldering pad design(unit=mm) duration above 217 is 80 sec. max preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:250 http://www.foryard.com model no. fylp-5052pgc-0.5w solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max average ramp-up rate:4 /sec.max duration above 183 is 80 sec. max fylp-5052pgc-0.5w a time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 solder= pb-free smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay.
|
